Engineering & Mining Journal

JUN 2016

Engineering and Mining Journal - Whether the market is copper, gold, nickel, iron ore, lead/zinc, PGM, diamonds or other commodities, E&MJ takes the lead in projecting trends, following development and reporting on the most efficient operating pr

Issue link: https://emj.epubxp.com/i/689616

Contents of this Issue

Navigation

Page 89 of 99

88 E&MJ; • JUNE 2016 www.e-mj.com EQUIPMENT GALLERY Sandvik Mining said its line of top center drill bits are now available as standard products in three sizes. Primary appli- cations for these bits—using a design approach described as a technological breakthrough in bit effectiveness—in- clude face drilling and bolting in both mining and tunneling environments, where long bit life is essential in cutting costs and improving productivity. The company explained that its top priority when developing the new bit line was to increase service life. Because the main reason for discarding a drill bit is excessive wear on the diameter, the sim- plest way to achieve longer service life is to add more gauge buttons. However, this can prove problematic because of the limited space available. Furthermore, an increase in the number or size of the carbide buttons generally decreases the penetration rate: the same impact force yields a lower net force per button. The new design solves these problems with a so-called raised front, elevating two or three front buttons (depending on diameter size) a few millimeters above the gauge buttons located on the periph- ery of the bit. The front buttons are also set at a slight angle relative to the sym- metric axis of the bit. The raised front creates a recessed hole-bottom pattern that alters the rock-breaking action to achieve improved performance. Top center bits also feature an inno- vative cemented carbide grade known as GC80. "The problem with the carbides that exist on the market today is that they are either wear-resistant or tough," said Robert Grandin, product manager of top hammer tools at Sandvik Mining. "When developing GC80, we wanted to combine the best of those two worlds in order to get as much as possible out of the top center design." The key to this, according to Sandvik, is a completely new production method that makes it possible to produce a but- ton that improves wear resistance on the outside, yet combines toughness with a softer center, extending service life and grinding intervals even further. Tool life improvements brought about by the Sandvik top center design are also claimed to yield signifi cant safety bene- fi ts, because operators spend less time near an unreinforced face. "The new bit design essentially delivers more drill me- ters per shift compared with a standard bit, thanks to less frequent bit changes," Grandin said. The company said that more than 1,000 hours of testing in widely varying conditions and sites have shown oper- ators logging more drilled meters and more holes between each regrind. Less regrinding means less wear on the drill diameter. Sandvik claims the new bit design offers up to 80% longer grind- ing intervals and up to 60% longer bit life. An additional benefi t is more accurate collaring, which directly im- pacts the accuracy of drilled holes and consequently blasting results. Top center drill bits are available in bit sizes 43, 45 and 48 mm with two to three raised end buttons and 7–8 gauge buttons in grade GC80 and connections R32, Sandvik Alpha 330 and R35. www.sandvik.com Motor Analyzer Pinpoints Performance and Problems The new Fluke 438-II power quality and motor analyzer uses innovative algorithms to analyze not only three-phase power quality, but also torque, effi ciency, and speed to determine system performance and detect overloaded conditions, elim- New Top Hammer Bit Line has Longer Life, Extended Regrind Intervals

Articles in this issue

Links on this page

Archives of this issue

view archives of Engineering & Mining Journal - JUN 2016